KODAK Tri-X Processing
Do not use a safelight. Handle unprocessed film
in total darkness.
Use a water pre-soak for one minute with gentle
agitation.
Drain tank and pour in developer - rap tank
on hard surface to remove air bubbles. Agitate
gently for 30 seconds.
Then repeat this agitation procedure at 30-second
intervals for the rest of the development time.
KODAK TRI-X Pan Film / TX
|
KODAK
Developer or
Developer and
Replenisher |
Development Time (Minutes) |
Small Tank* |
Large Tank1 |
65°F
(18°C) |
68°F
(20°C) |
70°F
(21°C) |
72°F
(22°C) |
75°F
(24°C) |
65°F
(18°C) |
68°F
(20°C) |
70°F
(21°C) |
72°F
(22°C) |
75°F
(24°C) |
T-MAX |
7 |
6 |
6 |
5 1/2 |
5 1/2 |
NR |
NR |
NR |
NR |
NR |
HC-110 (DilB) |
8 1/2 |
7 1/2 |
6 1/2 |
6 |
5 |
9 1/2 |
8 1/2 |
8 |
7 1/2 |
6 1/2 |
D-76 |
9 |
8 |
7 1/2 |
6 1/2 |
5 1/2 |
10 |
9 |
8 |
7 |
6 |
D-76 (1:1) |
11 |
10 |
9 1/2 |
9 |
8 |
13 |
12 |
11 |
10 |
9 |
* With agitation at 30-second
intervals. Development times shorter than
5 minutes may produce unsatisfactory uniformity.
1 With manual agitation
at 1-minute intervals. Development times shorter
than 5 minutes may produce unsatisfactory
uniformity.
NR = Not Recommended |
|